The Blue Frog™ System (BFS) technology utilizes natural biological processes to biodredge your
lagoon system eliminating mechanical dredging. All designs are customized to meet specific
project objectives. Please complete the questionnaire to receive a design concept for your
Blue Frog™ System (BFS) Technology requires a 3’ engineered float depth.
Applications: Sludge Storage Ponds, Effluent Storage Ponds, Wastewater Treatment Ponds,
Stabilization Lagoons, Facultative Lagoons, Sludge Tanks, Oxidation Ditches, and EQ Tanks.
NOTE: All project designs require the following:
- A System Schematic with flow patterns.
- Include lagoon depths.
- Six months of your most recent DMR’s and a copy of your permit.
- Influent data.
- Sludge analysis report to determine TS & VS. (see below for instructions)
- pH levels.
- Explain any problem(s) unique to your facility.
Please forward additional information to our customer service department:
firstname.lastname@example.org / Ph: (888) BFS-7912 / FAX: (866) 583-4160
Sludge Sample Instructions:
Please use a Sludge Judge or equivalent to take the sample. Take five samples [over the flat part of the lagoon], in each corner and in the middle. Discharge the sludge portion of each sample into a five-gallon pail. Stir the pail to make a composite sample. Send a sample to the lab for Total Solids, Percent of Volatile Solids, field pH, field temperature and ammonia. The non-volatile fraction is the fraction that is not digestible.